Removing The Moisture From The Air And Your Processes
There are some industries that deal with products and processes that must be free of moisture but are dependent on compressed air to complete the task. When this is the case, there has to be a way to remove the moisture from the air before it comes into contact with the product or process. Filtration is one way to do it but may not be enough by itself. What are the options to remove the water from the air you are using?
Filters and Separators
When air is compressed, one of the by-products is moisture. While it is not a problem in many situations, there are times when that water must be removed from the air. The first step is to filter the air at the tank and install a water separator on the line coming out of the storage tank. This will help to remove the water, and, for most applications, this will be enough. There is still going to be some water in the air at this point, but it will be minimal.
Getting The Right Air Dryer For Your Needs
If your water separator is leaving you with too much water in the compressed air you are using, it might be time to look at an industrial air dryer. When you get to this point, you will have to start looking at specifics because there are different systems for different purposes. Not every air dryer is the same and there may be one that will be better suited to your use. Before you buy an air drying system, talk to companies like Kruman Equipment Company about what your needs are so they can recommend the right system for you.
Industrial Dryers Versus Medical Dryers
If you are looking for a dryer for a medical practice, you will need a very different unit than what is used in an industrial setting. The filtration and method of removing the moisture are similar in both, but the medical-use air dryer is suited for use in doctors offices and medical facilities.
Rebreather System Air Dryers
Another common use for air dryers is filtering and drying the compressed air that is used in breathing air tanks. Divers, firefighters, rescue personnel, and people working around hazardous materials are just a few of the people that depend on compressed air to breathe while they work. The moisture is removed from the air put into these tanks to avoid problems with corrosion and problems with the regulator that controls the air available to the person using it. A failure in that system would mean the user would not be getting breathing air at all.
